V2025 Poster Exhibition

Sorted by alphabetical order

Maria Barrera | S1-1 | Fraunhofer FEP, Germany | „Surface wettability modification of polymers for use in electrocaloric heat pumps“

Dennis Barton | S4-1 | Fraunhofer IST, Germany | „You don’t get anything from predictions, until you use them – About the use of digital methods to optimize and control your coating processes“

Jessica Borowy | P01 | IOT of the RWTH Aachen, Germany | „Three-dimensional Analysis of Plasma Properties for Industrial HiPIMS/dcMS Batch Processes“

Frank Burmeister | P02 | Fraunhofer IWM, Germany | „Effect of superimposed HiPIMS + RF on HiPIMS Current“

Philipp Dürrenfeld | P03 | Advanced Energy Industries GmbH, Germany | „Influence of power delivery modes on the sputter deposition of Zinc Tin Oxide films from compound targets“

Manuela Ehrhardt | S1-2 | Fraunhofer FEP, Germany | „Enhancing the Crystallization of Sputtered Titanium-Oxide-Films for Antipathogenic Surface Applications via Various Annealing Techniques“

Gerhard Eichenhofer | P13 | 4A-PLASMA, Germany| „Inverted Fireballs for Advanced Manufacturing“

Yassine El Boujrafi | P14 | TU Darmstadt, Germany | „Development of Electrochemical Characterization Methods for Metallic Bipolar Plates in Fuel Cell Applications“

Martin Fenker | P04 | fem Forschungsinstitut, Germany | „Inverted Fireball-Assisted Magnetron Sputtering: A Novel Approach to Thin Film Deposition“

Wojciech Gajewski | P15 | TRUMPF Huettinger Sp. z o.o., Poland | „Influence of different discharge frequencies on gliding discharge ammonia decomposition for hydrogen recovery“

Wojciech Gajewski | P16 | TRUMPF Huettinger Sp. z o.o., Poland | „New generation of ARC power supplies for future applications and upgrade of legacy systems“

Wojciech Gajewski | P05 | TRUMPF Huettinger Sp. z o.o., Poland | „Understanding the effect of ignition voltage in the dynamic pulse-current control mode of HIPIMS discharge“

Gonzalo Garcia Fuentes | S1-3 | AIN Asociación de la Industria Navarra, Spain | „Effect of Mo and W over the crystallinity and mechanical properties of magnetron sputtered AlTi(MoW)N layers“

Rafael Gryga | S1-4 | Robert Bosch Manufacturing Solutions GmbH, Germany | „Improved coating properties by additional plasma source during sputter process“

Gustav Gürtler | S3-1 | voestalpine Stahl GmbH, Austria | „Development and application of low energy plasma treatments for steel surfaces“

Mike Hettich | S4-2 | Research Center for Non Destructive Testing GmbH, Austria| „Laser Ultrasound – A Non-Contact and Non-Destructive Methodology for Ultra-Thin and Thin Film Metrology“

Michael Hoffmann | P17 | Fraunhofer FEP, Germany | „Roll-to-roll magnetron sputtering of alumina (Al2O3) onto plastic films for sustainable packaging“

Michael Hofmann | S4-3 | SURAGUS GmbH, Germany | „Near-process Sensor Integration for Characterization of in-vacuo Deposited Thin Films by Eddy-Current Sensor Metrology“

Mandy Höhn | P18 | Fraunhofer IKTS, Germany | „Endless SiC-Fiber Coatings for Usage in Ceramic Matrix Composites“

Peter Kaestner | S3-2 | Technical University Braunschweig, Germany | „Resource-Efficient Plasma Nitriding of Stainless Steels for Combined Tribological and Corrosive Stresses“

Marta Miranda Marti | S1-5 | IOT of the RWTH Aachen, Germany | „Self-lubricating TiBN coatings using pulsed arc PVD technology to reduce friction and wear“

Manuel Mee | S1-6 | Fraunhofer IWM, Germany| „DLC-Coatings for PFAs-free lubricants“

Max Philipp Möbius | P06 | IOT of the RWTH Aachen, Germany | „The Concept of Improved HiPIMS Control Using a Synchronized Positive Bias Pulse“

Jörg Neidhardt | P07 | Fraunhofer FEP, Germany | „Digitalization of magnetron sputter processes for deposition of piezoelectric thin films“

Jörg Neidhardt | P08 | Fraunhofer FEP, Germany | „Controlled Reactive Magnetron Sputter Epitaxy of GaN Using a Solid Ga Target“

Jörg Neidhardt | P09 | Fraunhofer FEP, Germany | „Advanced process control using double ring magnetron for polarity control in sputtered epitaxial AlN“

Moritz Oberberg | P10 | House of Plasma GmbH, Germany | „Probe measurement technology MRP used in pulsed plasma processes“

Christian Patzig | S4-4 | Fraunhofer IMWS, Germany | „Microstructure Characterization of Optical Systems exemplified by damaged Laser Mirrors“

Gayatri Rane | P11 | Advanced Energy Industries GmbH, Germany | „Effect of sinusoidal and bipolar-pulsed power delivery on dual magnetron sputtering processes“

Beiker Martínez Rueda | S3-3 | Federal University of Santa Catarina, Brasil | „Diffusion Welding of Surface-Treated Aluminum Plates Via Plasma Sputtering“

Beiker Martínez Rueda | S2-1 | Federal University of Santa Catarina, Brasil | „Structural Analysis of Carbon Thin Films Deposited In TI-6Al-4V by the PIII&D Technique“

Christoph Schulze | S2-2 | Oerlikon Surface Solutions AG, Liechtenstein | „PVD Coating for Plastic Processing Applications“

Ruben Seifert | S2-3 | Von Ardenne GmbH, Germany | „Properties of carbon coatings and applications“

Cindy Steiner | S2-4 | Fraunhofer FEP, Germany | „Adhesion enhanced decorative coatings on ETFE – Combination of Plasma and Nanoimprint Roll-to-Roll processes for BIPV“

Olaff Steinke | P12 | FAP GmbH Dresden, Germany | „Effective transfer of high RF power with frequencies 13.56 MHz -81.36 MHz to plasma sources over long distances of up to 70 m“

Kerstin Täschner | S2-5 | Fraunhofer FEP, Germany | „Improvement of the adhesion force of sputtered aluminum layers on polyethylene terephthalate films (PET) by surface modification using flash lamp annealing“

Sabour Un Nisa | S3-4 | Leibniz-Institut für Polymerforschung Dresden e. V., Germany | „Depth profiling of near-surface effects in low pressure plasma-treated PDMS by VUV spectroscopic ellipsometry“

Robert Werberger | S4-5 | Fraunhofer FEP, Germany | „Optical Emission Spectroscopy during Anodic Arc Deposition of Dielectric Films“

Martin Wilhelm | S3-5 | MCI, Universität für Bodenkultur Wien, Austria | „Metallisation of Electrically Conductive Ceramics for Methane Dry Reforming Applications“

Dongfang Yang | S2-6 | National research council canada, Canada | „Sputtering of UV blocking hard coatings for protecting plastics“e